Idiomas disponibles
Idiomas disponibles
English
DESCRIPTION
OF THE APPLIANCE
2
The dehydrator consists of:
1. a square section tunnel containing the drying
drawers fitted on sliding guides;
2. a motor unit, equipped with an electric fan
which draws air inside the tunnel through the
drawers, and a heating resistance, which allows
accelerating the drying process and makes it
safe during the night and during low tempera-
ture and high atmospheric humidity periods (in
particular with high water content products or
in phases preceding the withdrawal of the dried
product). The motor unit can be disconnected
from the machine by sliding it upwards after
being released from the safe sliding tab. This
operation is to be carried out only with the
machine switched off and disconnected from
the mains.
3. an inspection hatch that closes the second
opening of the tunnel. The hatch is provided
with small holes to allow air passage. If slid
upwards along the guides, the hatch allows ac-
cess to the drying tunnel to check the degree of
drying of the food being processed and has the
same
14
6
1
7
7
5
locking device type provided on the motor side.
4. six perforated drawers on which the material
to be dried is placed; they have to be inserted
inside the tunnel on the sliding guides; the
drawers construction material varies according
to the dehydrator version.
6. On the dehydrator top are provided two safe
sliding tabs, which ensure the fastening of the
hatch and the motor unit. The hatch and motor
unit fastening ensure safe handling of the appli-
ance since they prevent it from getting released
from the guide and suffer damages.
DIMENSIONS
AND SPECIFICATIONS:
PRO and PRO DELUXE Versions:
The maximum outer section is cm 27x27; the inside
of the tunnel has cm 25x25 section, and the length
is 50 cm.
The drawers measure cm 25x36 each.
The heating resistance absorbs 500 watts and the
switching on is electronically adjusted by the board.
Made in Italy
6
4
7
7
3
