Scooty CITY 26 PRO Manual De Instrucciones página 15

Saddle and wheels :
Model Saddle and
seatpost
GT-EC-400
Commercial
name : Scooty
City 26 PRO
Caution: Under certain conditions, the controller, the charger, the mechanical
disks and some parts of the product can reach high temperatures. Therefore, avoid
contact or protect yourself (gloves, protections,...) before touching these parts within
minutes after using the product. Do not expose the product to temperatures above
50°C. Beyond this range the autonomy will be affected. Furthermore, in a confined
environment, high temperatures will affect the composite materials of the product.
3.3. CHARGING AND BATTERY INDICATOR
Charge the battery before first use. To do so, charge the device using the charger
supplied.
IMPORTANT: Only charge the device with the original charger supplied with the
device by the manufacturer. In case of doubt, loss or malfunction, avoid charging the
device with another charger. It is advised you obtain a new charger from your dealer.
You will find the email address to contact customer support on the last page of the
warranty manual.
Next, check the battery charge level before use, using the battery level indicator (11).
There are two ways to recharge the battery:
1. Remove the battery to recharge it.
2. Recharge the battery directly from the battery pack attached to the bike.
In any case, it is advisable to make the connections in the following order:
1. Connect the charger output plug to the battery first, then connect the charger input
plug to the household electrical outlet.
2. Disconnect the input plug from the house power outlet first, then the output plug
from the battery.
SADDLE
Seat post and seat
tube (frame)
3.6 quick lock
15
WHEELS
Rear wheel to Front wheel to fork
frame
35
EN
25