Idiomas disponibles
Idiomas disponibles
9. Settings
The AC240P offers the convenience of adjusting its settings either via the LED screen or
the BLUETTI App. With the unit's LED screen, you have direct control over various
settings such as Power Lifting Mode, ECO Mode, output frequency, and charging
modes. Additionally, by using the BLUETTI App, you can access a user-friendly interface
on your phone to conveniently monitor and control the AC240P.
9.1 Setting Mode
When the screen is on, press and hold the AC and DC Power Buttons for about 2
seconds till the output frequency flashes to enter the Setting Mode.
9.2 ECO Mode
The AC240P has two ECO modes that help you save power and extend battery life:
•
AC-ECO Mode
In this mode, if the AC power output falls below a certain level for a set period of time,
the AC power will automatically turn off.
Note: This mode is not available when the AC240P is charging from an AC source like a
wall outlet or generator.
Note: This mode can only be configured using the BLUETTI App.
•
DC-ECO Mode
In this mode, if the DC power output falls below a certain level for a set period of time,
the DC power will automatically turn off.
Attention:
•
The AC-ECO and DC-ECO modes are enabled by default to save energy, and it's
recommended to keep them enabled at all times.
•
Use the BLUETTI App to enable or disable AC-ECO Mode and DC-ECO Mode separately.
If you use the LED screen, they'll be turned on or off at the same time.
•
To avoid any interruption in charging, disable ECO Mode when charging a small device
that consumes less than 60W of power.
In the Setting Mode, press the DC Power Button to navigate through the setting items.
When the
icon flashes on the screen, press the AC Power Button to enable or
disable the ECO Mode.
9.3 Frequency Switching
20
JUST POWER ON
