Step 22
å
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D12 and D13).
å
Fasten the DRAWER RIGHT (35AC) to the RIGHT DRAWER SIDE (D12) and the DRAWER LEFT (35AD) to the LEFT
DRAWER SIDE (D13). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
NOTE: The glides are not intended to rotate.
å
Fasten two KNOBS (198K) to the LOWER RIGHT DRAWER FRONT (J). Use two BLACK 1-1/8" PAN HEAD SCREWS (9S).
å
Repeat this step for the remaining drawers.
2
198K
www.sauder.com/service
Glide end
1
D13
J
Center the screw in the oval hole.
BLACK 1-1/8" PAN HEAD SCREW
10A
(12 used for the KNOBS)
Drawer Slide
430079
6
9S
Screw head - turn CAM to line
up holes in the SLIDES with
holes in DRAWER SIDES
10A
Glide end
D12
1
2
GOLD 5/16" FLAT HEAD SCREW
(24 used for the SLIDES)
3S
Page 27
