Step 21
1
D12
Groove
å
Insert the DRAWER SIDES (D12 and D13) at an angle
into the slot at each end of the DRAWER FRONT (J).
3
M67
1
Surface with
HIDDEN CAM
å
Fasten the DRAWER BRACE (M67) to the DRAWER
FRONT (J). Tighten one HIDDEN CAM.
Page 26
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
J
D13
Hidden part using
recycled material.
Color may vary.
J
2
U n fi
n i s h
s u r
f a c
e
D12
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Slide the DRAWER BOTTOM (D733) into the
grooves in the DRAWER SIDES (D12 and D13)
and DRAWER FRONT (J).
4
D12
M67
å
Fasten the DRAWER BACK (D128) to the DRAWER
SIDES (D12 and D13) and DRAWER BRACE (M67). Use
five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Repeat this step for the remaining drawers.
430079
1
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
e d
D733
J
D13
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(20 used in this step)
D128
Be sure the
D13
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
www.sauder.com/service
9
