D-Link DIR-615 Manual De Instrucciones página 4

Ocultar thumbs Ver también para DIR-615:

Section 4 - Configuration

Protocol:

Indicates to which protocol(s) the filter applies.

[Source IP

Indicates the IP address range and port(s) to which the filter applies.

address]

General Settings

Enable rule:

Toggle this switch to enable the rule.

Name:

Specify a name for the rule. This name is for reference only and does

not affect functionality.

Action:

Choose the action to be taken when the rule is triggered. Choose

Allow or Deny.

Choose which protocol to which the rule will apply. Choose from TCP/

Protocol:

UDP, TCP, UDP, ICMP, or <All>

Choose if the rule should apply to IPv4 or IPv6.

IP version:

Destination IP Address

Set as:

Choose Range or single IP address to enter a specific IP address or

ranges for the destination filter. Choose Subnet to specify a subnet

only.

Start/End IPv4/

If you have selected Range or single IP address, specify an IP address

IPv6 address:

range for the destination filter. To enter a single address, use only the

Start IPv4/IPv6 address field and leave the End IPv4/IPv6 address

field blank.

Subnet IPv4/IPv6

If you have selected Subnet, specify the destination subnet to filter.

address:

D-Link DIR-615 User Manual

IP Filter Create/Edit