Kohler K-1243 Instrucciones De Instalación página 4

IMPORTANT CONSUMER INFORMATION
CARE AND CLEANING
Do not
use abrasive cleansers or solvents on acrylic products.
Wipe out your acrylic fixture with a soft cloth after each use to prevent a build-up of
soap and scum. If the surface gets excessively dirty you can use a general
purpose cleaner such as: Cinchr, Glass Plusr, 409rAll Purpose, Dow Soap Scum
and Mildew Remover, Scrub Freer Mildew Remover, Mr. Cleanr Lemon Fresh, or
Fantastikr. You can also use an automotive-type polishing compound, followed by
an application of good-quality paste wax.
Avoid cleaning products that contain the following chemicals, as they will damage
the finish of your acrylic fixture: acetone, ethyl alcohol, amyl or ethyl acetate,
sodium hypochlorite, toluene, or phenol.
Extreme heat such as that generated by cigarettes or portable heaters can damage
acrylic surfaces; do not use such items near your fixture.
CALL US FOR HELP
Here's what you need to do if you require service:
First review the installation instructions to ensure correct installation. For additional
assistance in the USA, call our Customer Service Department for direct help. You may
also contact us at our web site listed below.
Call 1-800-4-KOHLER within the U.S.
Call 001-877-680-1310 within Mexico
Call 1-800-964-5590 within Canada
1011309-2-A
www.kohler.com
Kohler Co., Kohler, WI U.S.A.
4