Idiomas disponibles
Idiomas disponibles
ALWAYS
THROWN OBJECTS
Eye
1
" r° tecticn/ .
li
Boots
| I! _ --'----
_k WARNING:
Trimmer line can
throw objects violently. You can be
blinded or injured. Wear eye and leg
protection.
d Zone
A
dBt,WARNING:
Hazard zone for
thrown objects. Blade/Trimmer
line can
throw objects violently. Others can be
blinded or injured. Keep people and
animals 50 feet (15 meters) away.
A
41WARNING:
Do not use trimmer
head as a fastening device for the
blade.
_IL WARNING:
The blade continues
to spin after throttle
is released
or, en-
gine is turned
off. The coasting
blade
can throw
objects
or seriously cut you
if accidentally
touched.
Stop the blade
by contacting
the left hand side of
coasting
blade with material
already
cut.
Stop coasting
blade by contact
with cut material.
®
OPERATOR SAFETY
• Dress properly. Always wear safety
glasses or similar eye protection
when operating, or performing main-
tenance on your unit. (Safety glasses
are available.) Always wear face or
dust mask if operation is dusty. Al-
ways wear heavy, long pants, long
sleeves, boots, and gloves. Do not
go barefoot or wear sandals.
• Secure hair above shoulder length.
Secure or remove loose clothing and
jewelry or clothing with loosely hang-
ing ties, straps, tassels, etc. They
can be caught in moving parts.
• Being fully covered also helps pro-
tect you from debris and pieces of
toxic plants thrown by spinning line.
• Stay Alert. Do not operate unit when
you are tired, ill, or under influence
of alcohol, drugs, or medication.
Watch what you are doing; use com-
mon
sense.
• Wear hearing protection if you use the
unit for more than 1-1/2 hours per day.
• Never start or run the engine inside a
closed room or building. Breathing
exhaust fumes can kill.
• Keep handles free of oil and fuel.
• Always use the handlebar and a
properly adjusted shoulder strap with
a blade. See ASSEMBLY.
UNIT/MAINTENANCE
SAFETY
• Look for and replace
damaged
or
loose parts before
each use. Look
for and repair fuel leaks before
use.
Keep unit in good working condition.
• Throw away blades that are bent,
warped, cracked,
broken, or dam-
aged in any other way. Replace
trim-
mer head parts that are cracked,
chipped, broken,
or damaged
in any
other way before using the unit.
• Maintain the unit according
to recom-
mended procedures.
Keep the blade
sharp. Keep the cutting line at the
proper length.
• Use only .080" (2.4 mm) diameter
Craftsman
© brand line. Never
use
wire, rope, string,
etc.
• Install
required
shield
properly
before
using the unit. Use the metal shield
for all metal blade use. Use the plas-
tic shield for all line trimmer
use.
3
