Idiomas disponibles
Idiomas disponibles
Black Wall
G
200mm
H
200 mm
Water Inlet
4.Operation
1. Add water to bowl
To add water to the toilet, press the ush pedal part
way down. Water ows into the bowl while ush
valve remains closed. If the ush valve moves, let up
on the pedal slightly. Adding water to an empty
bowl helps prevent holding tank odors from enter-
ing the living space. Adding water is recommended
prior to ushing solids and toilet paper.(Fig.4)
2. Flush toilet
To ush, press pedal down until it contacts the oor.
Release pedal after complete ush.(Fig.5)
When ushing liquids, press the pedal for 1-2
seconds. When ushing solids, press pedal until
contents are rinsed from bowl. Flushing longer than
necessary will cause holding tank to ll too quickly. A
small amount of water will collect in the bowl after a
ush t create an airtight seal.
4
www.serenelifehome.com
I
200 mm
1. Fig. 1
1. FIg.3
Pipe Connector
Sealing Ring
Strainer
1. Fig. 3
Before connecting your pipe
connector (plastic one is
recommended) to the ½ inch water
inlet (1/4-20 British thread), make
sure there is a sealing ring in the pipe
connector. If not, the attached
sealing ring must be placed to ensure
perfect sealing.
After connecting water supply, ush
the toilet several times to check
leaks.
Fig.4
Fig.5
