Idiomas disponibles
Idiomas disponibles
TESTING THE TRAMPOLINE
After assembling the trampoline, it is important that you perform the following safety checks:
Trampoline Safety Chceks:
•
Using a screw driver, check if all the screws are tightly secured.
•
Look undermath the trampoline and check all the springs are hooked securely to the frame and
triangle rings.
•
Move the trampoline aournd and check the sturdiness of the frame.
•
Uing your two hands, put your body weight on one section of the trampline and release to check
that the folor is even.
•
Inspect the cover pads and check if they completely cover the springs and frame.
•
Make sure the strings of the pads are tied securely.
Enclosure Net Safety Checks:
•
Hold onto pole net jacked and check that all the enclosure poles are sturdy by shaking it.
•
Check the enclosure net and ple jacket for any tearing in the stitching or material.
•
Check the enclsoure net zipper and enctrance hooks funcition properly.
•
Check to see if all safety enclsoure hoks are attached to the traingle ring undermeath the
trampline
Once all the checks are performed and the trampoliens ahs pased all the intial test (above),then your
trampl have one person test the trampline by jumping on the certer continuously for 5 minutes. If the
trampoline feels sturdy then your trampoline passes the test. Congratulations, you have completed
the trampoline assembly! Remember to abide by all the safety rules. Have fun, play safe...
