Hitachi ATW-RTU-12 Manual De Instrucciones página 12

4. TECHNICAL DATA
4.1 Technical data
• Dimensions (mm): 90x87x74 mm
• Weight: 193 g
• ABS plastic housing
• Pollution category: Class 2
• Operating Temperature:
+5 °C to + 35 °C
• Operating Humidity: between 30%
and 80%
• Equipment protection rating: IP30
• Maximum altitude for use: < 2000m
4.2 Communication
• Bluetooth: 5 (LE) (2402~2480 MHz,
max transmit power 20 dBm using
AFH)
• Receptor class 2
5. SWITCH NAMES AND FUNCTIONS
Temperature
Set Indicator
Mode
Indicator
Run Indicator
On/Off Button
Operation Mode
Button
• The supplementary information about the purchased products is available through the QR
printed in the front cover.
• In case that no access to the website or files are not readable, please contact your Hitachi
dealer or distributor.
• The backlight turns off 30 s after the last operation. If you press any switch, the backlight is
turned on. (Configurable by means of an optional function.)
• Make sure to press the buttons lightly with your fingertips.
• Do NOT press the buttons or anything with sharp points, such as a ball point pen. This may
damage the controller.
EN
PMML0653 rev.1 - 04/2024
Menu Button
Fan Speed / Back
Button
4.3 Power supply
• Supply voltage: 230V/50Hz
• Wattage: 5 W
• Rated power supply : 12 VDC
• Rated Consumption: 0.42 A
4.4 Declaration of conformity
Hereby, Johnson Controls-Hitachi
declares that the radio equipment
type covered by these instructions is in
compliance with the requirements of
the Radio Equipment directive 2014/53/
EU and UK Statutory Instrument S.I.
2017 N°1206.
Current Time
Fan Speed
Indicator
Directional
Key
Power
supply
connector
2