Idiomas disponibles
Idiomas disponibles
EN
MANUAL OF INSTRUCTIONS
1. TECHNICAL SPECIFICATIONS
Measurement range:
Resolution:
Precision:
Repeatability
Maximum measurement speed: 1.5 m/s (60''/s)
Energy:
Working Temperature:
Note:
2. FUNCTIONS
1. Zero setting at any position, makes it easy to take relative measurements.
2. Metric/Inch system interchange at any position.
3. Data output interface (SSI): Data can be input to a special printer or computer via special cable for data
processing and printing.
3. OPERATION
Measurement
Loose the locking screw
Press On/Off button to switch on the power.
Press mm/inch button to select the desired unit system.
Adjust the jaws to make the measurement.
Data holding
To keep the value fix on the screen, tighten the locking screw (10). By doing this, the jaws will stay in a fixed posi-
tion and the value on the screen will stay fixed, too.
Battery replacement
Abnormal display (e.g.: digits flashing or no display) is a sign of a weak battery. To replace this battery, push the
battery cover as the arrow directs and replace it with a new one. Please note the positive side of the battery must
face out.
4. TROUBLESHOOTING
Problem
Possible causes
Flashing Digits
Weak battery
No display
1. Low voltage
2. Poor contact
Fixed Digits
Problem in the circuit
5. TYPES OF MEASUREMENT
Step measurement
6. CAUTION
1. Remove the battery if the calliper is not to be used for a long time.
2. Do not hit or use the calliper inappropriately
3. To avoid the dust penetrate, store the calliper to its case after using it.
0-150mm / 0-6''
0.01mm / 0.0005''
±0.02mm / 0.001" (<100mm)
±0.03mm / 0.001" (100-150mm)
0.01mm / 0.0005"
Lithium Button Battery LR44, 1.5V, 180 mAh
5ºC ~ 40ºC / 41ºF ~ 104ºF
Precision could be affected in environments with levels of humidity over 80%
External measurement
· 3 ·
Solution
Replace the battery
1. Replace the battery
2. Adjust and clean the battery seat
Take out the battery for one minute and put it back
Interior measurement
Depth measurement
