Idiomas disponibles
Idiomas disponibles
Ice Service
Ice Trays
(on models without automatic icemaker)
To release ice cubes,
turn the tray upside down, hold
it over a container, and twist
both ends
For only one or two ice
cubes, leave the tray right-side
up, twist both ends slightly, and
remove as many cubes as you wanL
Wash ice trays in lukewarm
water
only. Do not put
them in on automatic dishwasher
Automatic lcemaker Accessory
Kit
(optional at extra cost)
If your refrigerator did not come already equipped with
an automatic icemaker, you may add one-contact
your
Sears store or Sears Service Center,
Automatic
Icemaker
(on icemaker-equipped
models)
if your refrigerator
is
operated
before water
is connected to the
icemaker,
keep the
icemaker feeler arm in the
STOP (up) position
When the refrigerator
has been connected to
the water supply and the
water
has been turned
on, move the ice storage
bin into place under the
icemaker Then move the
feeler arm to the ON
(down) position°
The ice cube mold will
automatically
fill with water
after cooling to freezing
temperature, and first
cubes normally freeze after
several hours,
Jcemoker
FeelerArm in
STOP (up}
position
Ice Storoge
8in
FeelerA_rninON
(down) position
When cubes are solidly frozen, they will be ejected from
the mold into the ice storage bin by means of a sweeper
arm Icemaking will continue until the feeler arm senses
that there are enough cubes in the bin and halts the
operation temporarily_ Be sure nothing interferes with the
swing of the feeler arm,
For maximum
ice storage,
level the stored cubes with
your hand occasionally
Once your icemaker is in operation,
throw away
the first few batches of ice cubes. This will flush away
any impurities in the water line Do the same thing after
vacations or long periods when ice isn't used
Move feeler arm to STOP (up) position when:
• the home water supply isto be off for several hours
• the ice storage bin is to be removed for a period
of time
- going away on vacation
(Also turn off the valve in the
water supply line to the refrigerator )
- turning the temperature control to the OFF position
If ice is not used often, old cubes will become cloudy
and taste stale. Empty the ice storage bin periodically
and wash it in lukewarm water
If this is your first icemaker, you will hear occasional
sounds that may be unfamiliar They are normal ice-
making sounds and are not cause for concern
Water Filter Accessory
(optional at extra cost)
Your ice cubes can only be as fresh-tasting as the water
that produces them° That's why it's a good idea to purify
the water with a water filter
The water filter is an optional part at extra cost and is
available from your Sears Service Center Order Filter
No 978488
and it may be installed in minutes when
attached to the inlet water tube connection
Water Supply Accessory Kit
(optional at extra cost)
A water supply kit containing copper tubing, shut-off
valve, fittings and instructions needed to connect the
icemaker to your cold water line is also available from
your Sears store or Sears Service Centen
i
See Automatic Icemaker Water Line
Installation Requirements on next page.
I
(continued next page)
7
