Storage And Disposal - Lumatek ZEUS 600W PRO 3.1 Manual Del Usuario

6.8
Warning! Warning! If not using an external lighting controller ensure external switching gear can cope Warning! Warning! If not using an external lighting controller ensure external switching gear can cope Warning! Warning! If not using an external lighting controller ensure external switching gear can cope Warning! Warning! If not using an external lighting controller ensure external switching gear can cope
with the inrush current of the LED fixture. Always use a digital timer contactor suitable for switching a with the inrush current of the LED fixture. Always use a digital timer contactor suitable for switching a with the inrush current of the LED fixture. Always use a digital timer contactor suitable for switching a with the inrush current of the LED fixture. Always use a digital timer contactor suitable for switching a
capacitive load. capacitive load. capacitive load. capacitive load.
Ensure the LED driver power supply cable self-locking female connector is correctly aligned to the correspond-
ing male connector on driver and push together until click-locked. To disconnect; turn female connector
anti-clockwise to unlock and pull apart from driver. Connect mains power plug to switching gear/power
supply. Switch on mains power.
7. PRECAUTIONS WHEN USING THE LED FIXTURE
8. INSPECTION, MAINTENANCE AND REPAIR
Regularly check the LED fixture for dust or dirt build up. Clean if necessary. Contamination may cause
overheating and decreased performance.
Clean the outside of the LED fixture using a dry or damp cloth.

9. STORAGE AND DISPOSAL

Store the LED fixture in a dry and clean environment, with an ambient temperature of -25ºC to 55ºC.
The product must not be discarded as unsorted municipal waste but must be collected separately for the
purpose of treatment, recovery and environmentally sound disposal.
10. WARRANTY
Lumatek Ltd warrants the mechanical and electronic components of their product to be free of defects in
material and workmanship if used under normal operating conditions for a period of five (5) years from the
original date of purchase. If the product shows any defects within this period and that defect is not due to user
error or improper use Lumatek Ltd shall, at its discretion, either replace or repair the product using suitable new
or reconditioned products or parts. In case Lumatek Ltd decides to replace the entire product, this limited
warranty shall apply to the replacement product for the remaining initial warranty period, i.e. five (5) years
from the date of purchase of the original product. For service; return the product to your shop with the original
sales receipt.