StetSom STX2448 FLOATING Manual De Usuario página 41

> CROSSOVER
In the crossover menu, each single tap on the "ENCODER" changes the parameter in
editing, including output, filter type, frequency, and attenuation/topology.
To select another output channel for editing,
give a single tap on the corresponding
"HOTKEY" shortcut key.
The maximum attenuation available for each filter on each output depends on the
Precisely define the cutoff frequencies of the low-pass filters (L.P.F.), high-pass filters
(H.P.F.), attenuations, and filter topology individually for each output.
AVAILABLE FILTERS AND
ATTENUATIONS ARE:
> ALIGNMENT (DELAY)
Digitally align the transducers (speakers) by correcting time in the DSP. This ensures
that the sounds from all speakers reach the listener simultaneously, preventing frequency
cancellations and improving sound fidelity. The adjustment can be done as follows:
1. Identify the coil farthest from the listener or the
front panel of the box, and use this coil as a reference;
2. Measure the distance from the other coils to the reference coil. These distances will be used in
configuring the delay for each output channel.
configured DSP FLOAT MODE and OUTPUT MODE.
Butterworth: 12/18/24/30/36/42/48 dB/8ª
Linkwitz-Riley: 12/18/24/30/36/42/48 dB/8ª
Bessel: 12/18/24/30/36/42/48 dB/8ª
41