StetSom STX2448 FLOATING Manual De Usuario página 40

This function is capable of generating sub-harmonic frequencies for the A+B signal (available
as a routing option). It enhances and extends the low frequencies (bass), making them more
pronounced. It is possible to define the maximum sub-harmonic frequency that can be
generated, as well as its intensity.
The SUBHARMONIC BASS produces low frequencies that some speakers may
not be designed to reproduce. Pay attention to the speaker's lowest frequency
response and correctly configure the high-pass filter (H.P.F).
> OUTPUT PARAMETRIC EQUALIZER
Choose gain/attenuation at a specific frequency, as well as the bandwidth of this equalizer
through the "Q" factor. The lower the "Q," the wider the bandwidth of this equalization
band, affecting neighboring frequencies to a greater extent.
The number of parametric equalizers
available in each output depends on
the configured DSP FLOAT MODE
and OUTPUT MODE.
> AUDIO INPUT/OUTPUT (ROUTING)
Select the audio source for each output:
A, B, or A+B (SUM) FOR EACH OUTPUT.
Use the "ENCODER" to change the audio source for the selected channel. To choose
another channel, give a single tap on the corresponding "HOTKEY" shortcut key.
Q = 0.4
Q = 4.0
40
Q = 1.0
Q = 10.0