VEVOR S0900915D Manual De Usuario página 7

5. UNFOLDING THE NET
Grip all remaining posts as a group and lift
them up in front of you. Then walk
backwards along the intended fence line,
dropping each post as it's pulled from your
hands, thereby unfolding the netting. To
reduce the risk of tangling the netting, try
to drop or toss each post in sequence,
helping to free it from the other posts you
are still holding. Unfold entire roll of
netting along the fence line.
7. JOINING 2 ROLLS OF STANDARD
NET
Start the second roll by placing its first end
post next to the last end post of the first
net. Use the 2 tie strings to tie them
6. INSTALLING LINE POSTS
Starting at the first post, walk along fence line,
picking up each post in turn and pushing it into
the ground. Apply only enough sideways
tension to each post to keep the netting erect
and straight. A trick is to use your boot to pull
against the stake until you feel quite a bit of
tension and the bottom wire is pulled taught.
Stretch netting is just tight enough to stand up
well. If there are changes in terrain then this
must be catered for whilst tensioning the fence
by using pegs to pull the bottom strand into
the hollows.
8. WIRE HANGING SYSTEM
A wire hanging system with stakes allows for
tightening the enclosure.
5