VEVOR S0900915D Manual De Usuario página 11

REPAIRING DAMAGED NET
Net Repair Kit (included with each net)
2. Measure out an appropriate amount of
the replacement conductive or non
conductive material.
4. Repeat step #4 on the other side of the
break. Place a brass ferrule over each of the
square knots and clamp together with pliers.
1. Use scissors to cut out the damaged
portion of the horizontal wire
3. Tie the replacement material to one side
of the break with a square knot. (If possible,
twist together the metal filaments of the
original material and the splicing material
before tying the knot.)
5. Place a brass ferrule over each of the
square knots and clamp together with pliers.
9