Tineco FLOOR ONE S3 Serie Manual De Uso página 28

Ocultar thumbs Ver también para FLOOR ONE S3 Serie:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Brush Roller Cover
1.Grab the front handle while pressing the
button and pull upward to remove.
Fig.D-8
2.Rinse with water.
Fig.D-9
3.While replacing, always latch the brush cover
into place to avoid leakage.
Fig.D-10
Brush Roller
1.Remove the brush roller by grabbing the brush
roller tab and pulling upward.
Fig.D-11
2.Remove the brush roller tab. Use the cleaning
tool to remove the hair and debris wrapped
around the roller and then rinse the roller with
water. Replace the brush roller back into the
accessory holder, and allow it to dry completely
before reinstalling.
Fig.D-12
3.Remove hair and debris from the brush roller
chamber and the opening with a tissue or a
damp cloth.
Fig.D-13
4.Replace the brush roller by inserting the brush
roller end into the right side of the holder,
then lock the pull tab into place by pressing
downward.
Fig.D-14
Note:
• A spare brush roller is provided with your
appliance for convenient replacement.
• To maintain optimal performance, replace the
brush roller every 6 months.
SCAN THE QR CODE BELOW TO
GET PRODUCT CARE VIDEOS.
TROUBLESHOOTING
Problem
The appliance does
not turn on
Weak suction
Brush roller tangled
indicator blinking
Voice prompt:
Please clean the brush
roller
CWT empty indicator
blinking
Voice prompt:
Clean Water Tank
empty, please refill
water and cleaning
solution
DWT full indicator
blinking
Voice prompt:
Please clean Dirty
Water Tank
All lights off in
operation
Battery level indicator
blinking
Voice prompt:
Low battery, please
charge
Self-cleaning icon
blinking
Power indicator
blinking
Note:
If the above troubleshooting guide fails to
provide a solution, please visit our website
www.tineco.com for further support.
26
Solution
Restart after cooling
down
Install the dry filter or
clean and allow it to
dry completely
Remove blockages
Refill CWT
Empty the dirty water
and then reinstall the
DWT
Cool the appliance
down and restart
Charge the appliance,
or restart
Start self-cleaning
Contact Customer
Service
loading