Garant GMT35 Manual De Uso página 46

GARANT GMT35 Surface finishing machine
7.3. WORKPIECE PROCESSING
de
F
i
Fill the trough only 1/3 full with workpieces.
1. Select the desired mode on the screen, and make the relevant settings in the Software [} Page 47]. en
2. Press to start the motor.
» The trough will start rotation of the abrasive chips.
3. Add the workpieces to be processed into the trough one after another.
cs
4. Set the desired motor speed.
CAUTION! Laceration hazard. Filling the chamber with workpieces can lead to lacerations. Wear protective
gloves when filling the chamber.
5. Pause the motor.
da
6. Fit the trough cover and lock it.
7. Close the noise-absorption hood and lock it.
8. Start the motor again.
9. On expiry of the processing time the motor will stop automatically.
7.4. CONCLUDING WORK
es
G
ü Transport trolley with transport boxes positioned under the separation unit.
ü Sieve appropriate to the size of workpiece and size of abrasive chips mounted.
1. Open the noise-absorption hood and the trough cover.
fr
2. Open the cover of the separation unit.
3. Open the side cover of the outlet from the trough and remove it.
CAUTION! Damage to hearing. Loud noise is generated when the abrasive chips and workpieces are being re-
moved through the outlet opening. Wear hearing protection
hr
4. Use the display screen to start the sieve process.
» The motor will impart vibration. The abrasive chips and workpieces are removed from the trough via the outlet.
» The abrasive chips are sieved into the front container of the transport trolley. Workpieces are sieved into the rear
container.
hu
5. To speed up the separation process, increase the speed of the motor.
6. One the trough is completely empty the sieving process can be ended.
7.5. SWITCHING OFF
it
nl
pl
ro
sl
46
1. Switch to the "Settings" menu.
2. Select the "Shut Down" menu item.