Idiomas disponibles
Idiomas disponibles
To manually pair the receiver with your phone
1. Make sure your mobile phone is Bluetooth-enabled and the
Bluetooth function is activated.
2. Receiver: Make sure the BoomBoom 76 is off.
Press and hold the MFB button (3) until the LED indicator
flashes in red and blue alternatively.
3. Phone: Scan for Bluetooth devices, then select "BoomBoom
76" in the available devices list.
4. Follow the pairing instructions that appear on your phone. If a
passcode is required, enter " 0000".
Note: For some mobile phones, when they are re-started, the
BoomBoom 76 connects with the mobile phone automatically.
To pair the receiver with your mobile phone via NFC
1. Make sure that the NFC function of you mobile phone is
turned on and that the phone screen is active.
2. Turn on the BoomBoom 76.
3. Place your phone over the receiver so that the NFC detection
area of each device touches the other.
4. Follow the pairing instructions that appear on your phone. If a
passcode is required, enter "0000".
Note: The BoomBoom 76 will automatically turn off if no paired
device is in range for 5 minutes when operated on the battery.
All the pairing information will be stored even after the power is
turned off.
