Idiomas disponibles
Idiomas disponibles
3.3 PRODUCT IDENTIFICATION
LABEL (Fig.1 )
1. Name and address of Manufacturer
2. Type of machine
3. Sound power level
4. Conformity marking
5. Power supply frequency and voltage
6. Year of manufacture
7. Serial number
8. Article code
9. Blade speed
Write the identification data of the machine in the
specific space on the label on the back of the
cover page.
IMPORTANT Quote the information on the
product identification label whenever you contact
an Authorised Service Centre.
3.4 SAFETY SIGNS (Fig.2 )
The machine has various symbols on it.
Meanings of the symbols:
WARNING! DANGER! The failure
to use this machine correctly can be
hazardous for oneself and others.
WARNING! Read the owner's
manual before using the machine.
DANGER! Keep hands
away from blade
Use ear and headprotection,
and goggles.
Wear non-slip safety footwear.
Use thick non-slip protective gloves.
Do not leave the machine in the
rain (or in damp conditions)
Remove
performing
cleaning
adjustment interventions on the
machine
WARNING! For battery and battery
charger see the dedicated manual
IMPORTANT Any damaged or illegible decals
must be replaced. Order replacement decals from
an Authorised Service Centre.
4. ASSEMBLY
IMPORTANT The safety regulations to follow
are described in chap. 2. Strictly comply with these
instructions to avoid serious risks or dangers.
For storage and transport purposes, some
components of the machine are not installed
in the factory and have to be assembled after
unpacking. Follow the instructions below.
Unpacking and completing the assembly
should be done on a flat and stable surface,
with enough space for machine handling and
its packaging, always making use of suitable
equipment.
4.1 UNPACKING
1. Carefully open the packaging, paying attention
not to lose components.
2. Consult the documentation in the box,
including these instructions.
3. Remove the machine from the box.
4. Dispose of the box and packaging in
compliance with local regulations
Before assembling (if necessary), make
sure the batteries are not inserted in their
housing.
EN - 6
the
battery
before
any
inspections,
or
maintenance/
