Idiomas disponibles
Idiomas disponibles
1. REMOVE THE ODOUR CARTRIDGE ASSEMBLY
Flip up the handle and rotate the dial counterclockwise until the
two arrows are aligned. Pull the handle to remove the dial from the
air purifier.
3. REMOVE NEW CARTRIDGE FROM CAN
Remove the new odour cartridge from the sealed packaging.
To maintain the life of the cartridge, keep it in the sealed
packaging until you are ready to install it.
5. INSTALL THE ODOUR DIAL ASSEMBLY
Align the arrow on the dial cover with the arrow on the air
purifier, then reinsert the dial into the air purifier. Rotate the dial
counterclockwise until it clicks into an intensity setting to engage.
Rotate further to change the intensity setting.
ANTI-ODOUR TECHNOLOGY REPLACEMENT
NOTE: Anti-Odour Technology is not included on all Shark HP150 series products.
2. REMOVE OLD ODOUR CARTRIDGE
Rotate the cartridge counterclockwise in the dial housing and pull out
the cartridge to remove it.
4. INSTALL NEW CARTRIDGE IN DIAL
Align the yellow arrow on the side of the cartridge with the yellow arrow
on the side of the dial cover, then insert the cartridge into the dial.
Rotate the cartridge clockwise to lock it in place.
6. USED CARTRIDGE DISPOSAL
Dispose of the old cartridge by dropping itinto the bin.
Note: Odour cartridges should be replaced every 3 months or as
needed for optimal Anti-Odour Technology performance.
TURN
UNTIL CLICK
TO LOCK
