Idiomas disponibles
Idiomas disponibles
BEFORE FIRST USE
● All parts of the blender are to be thoroughly cleaned before being used for the first time.
● Connect the device to the mains supply.
HOW TO USE BLENDER
1. Check the switch knob on the"0" bit pointer position.
2. Put the cup on to the motor base, and button clockwise.
3. Place the foodstuff you wish to process into the cup.
4. Put the lid on the cup and close securely. Place the measuring cap into the hole in the lid.
5. Switch on the motor base.
SPEED SETTING USE
1 (Low)
2 (High)
0
P (Pulse setting)
(The switch does not permanently engage in the" P " setting. You have to hold the switch in the "P"
setting or push it repeatedly.)
NB: Operate the motor for a maximum of 2 minute or alternating 2 minute
on, then 2 minute off to prevent overheating or consequent damage.
GRINDER
1. Place the dry foodstuff like coffee beans, almonds, peanuts, nuts and more into the grinder base.
2. Put the grinder cover on the grinder base and close securely.
3. Switch on the motor base to proper setting to mill.
HOW TO CLEAN
● The appliance is easier to clean it you do so immediately after use.
● Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to clean the appliance.
1. Switch the appliance off, remove the plug from the wall socket and wait until the f blade has stopped
running.
2. Turn blender cup to loosen counter-clockwise.
3. Clean these parts with the cleaning brush in warm water with some washing-up liquid and rinse
them under the tap.
4. Clean the motor unit with a damp cloth.
Never immerse the motor unit in water nor rise it under the tap.
For light usage with liquids.
For more solid consistency:
for mixing liquids and solid foodstuffs.
Stop operation.
Short, powerful impulse movements.
9
