Idiomas disponibles
Idiomas disponibles
I N S TA L L AT I O N
S T E P 3
Output Wiring
1. Strip away a minimum of 1 in (25 mm) of the outer cable jacket from the 4-conductor cable
(QSH-CBL-M or equivalent.). The shield and drain may be left floating.
2. Separate each conductor.
3. Strip ¼ in (6 mm) of insulation from each conductor .
4. Install the connector by arranging the four conductors by color and number according to the
diagram below. Insert the wire, and then tighten the screw to secure it in place.
Red | V+
White | DATA-
Purple | DATA+
Black | COM
8 | X96 INSTALLATION GUIDE
Q S H - C B L- M - 5 0 0 C A B L E
16 AWG (1.5 mm²)
16 AWG (1.5 mm²)
22 AWG (0.50 mm²)
22 AWG (0.50 mm²)
22 AWG (0.50 mm²) Drain
0.26 in (6.6 mm)
© 2023 Lutron Electronics Co., Inc.
P/N 3662841 Rev A
