WolfPack KWNG01 Manual De Instrucciones página 25

PROBLEM SOLVING
A staple or nail may jam in the magazine when stapling on hard surfaces. If this
happens, stop work and do not attempt to drive any more staples or nails.
• Press the release buttons fig. 6 and pull the magazine backwards.
• Remove the jammed staple. Use pliers for this purpose if necessary.
• Re-insert the magazine until the magazine lock Fig. 6 is engaged.
• Load the magazine again.
NOTE: If the staple strip is too short, this can cause the staples to jam.
STORAGE
Store the machine, the manual and accessories in the original packing. This way you always
have the necessary information on hand. Store the tool in a dry environment.
DISPOSAL
Do not dispose of this tool in household waste. According to the European standard
2012/19/EU for the disposing of electrical equipment (WEEE), it should be taken to your
local waste collection station and offered for recycling.
25