Idiomas disponibles
Idiomas disponibles
camera.select to optimize video quality with wider light range
and image details.
G-Sensor(Gravity Sensing)
The G-Sensor defines the required force needed to trigger
emergency recording.Once Emergency recording is
triggered the current recording will be saved and protected
from being saved over by the normal loop recording.To set
the required sensitivity please follow the instructions below.
1.Press the【OK 】Button to stop the dash cam from
recording.(no red dot flashing on the screen)
2.Press the【MENU】Button to enter the Video Menu.
3.Press the【MENU】Button again to enter the Settings
Menu.
4.Press the [◀ ] or [▶ ] button to select the Gravity Sensing
setting option,select 【OK】to confirm .
Note:
1.Menus cannot be accessed while the camera is
recording.Please stop the recording before attempting to
access the menu.
2. The default setting of G Sensor is "Medium".
3.If your memory card is filling up quickly you may need to
lower the sensitivity of the G-Sensor (Gravity Sensor)to
decrease the number of triggers caused by normal
driving.It's better to set G-Sensor to "Medium" to avoid too
many useless locked videos.
Parking Guard/Parking Monitor
It's used to protect your car after parking.With this function
on,after you stop the car and the camera turns off,it stays
standby.When camera detects shock and collision,it will
automatically turn on and take a short video,then shut down
automatically.
Note:
17
