Idiomas disponibles
Idiomas disponibles
English
I
Never use a power tool for applications other than those specified in the Instruc-
tion Manual.
10. Handle tool correctly.
Operate the toot according
to the instructions
provided herein. Do not drop or
throw the tool. Never allow the tool to be operated by children, individuals
unfa-
miliar with its operation or unauthorized personnel.
11. Keep all screws, bolts and covers tightly in place.
Keep all screws, bolts, and plates tightly mounted. Check their condition periodically.
12. Do not use power tools if the plastic housing or handle is cracked.
Cracks in the tool's housing or handle can lead to electric
shock. Such tools
should not be used until repaired.
13. Blades and accessories
must be securely mounted to the tool.
Prevent potential injuries to yourself or others. Blades, cutting implements
and
accessories which have been mounted to the tool should be secure and tight.
14. Keep motor air vent clean.
The tool's motor air vent must be kept clean so that air can freely flow at all times.
Check for dust build-up frequently.
15. Operate power tools at the rated voltage.
Operate the power tool at voltages specified on its nameplate.
If using the power
tool at a higher voltage than the rated voltage, it will result in abnormally
fast
motor revolution and may damage
the unit and the motor may burn out.
16. Never use a tool which is defective
or operating
abnormally.
If the tool appears to be operating unusually, making strange noises, or otherwise
appears defective, stop using it immediately and arrange for repairs by a Hitachi
authorized service center.
17. Never leave tool running unattended.
Turn power off.
Don't leave tool until it comes to a complete stop.
18. Carefully
handle power tools.
Should a power tool be dropped or struck against
hard materials inadvertently,
it
may be deformed, cracked, or damaged.
t9. Do not wipe plastic parts with solvent.
Solvents such as gasotie, thinner, benzine, carbon tetrachloride,
and alcohol may
damage and crack plastic parts. Do not wipe them with such solvents.
Wipe plastic parts with a soft cloth lightly dampened with soapy water and dry
thoroughly.
20. Use only depressed
center
wheels having a maximum
operating speed at
least high as 12,300 RPM.
