Hitachi G 13SC2 Manual De Instrucciones E Instrucciones De Seguridad página 4

Ocultar thumbs Ver también para G 13SC2:
Idiomas disponibles

Idiomas disponibles

English
I
GENERAL
SAFETY
RULES
z_ WARNING
: Read and understand
all instructions.
Failure to follow
alJ instructions
listed below, may result in
electric
shock, fire and!or serious
personal injury.
SAVE THESE
INSTRUCTIONS
1. Work Area
(1) Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
(2) Do not operate
power tools
in explosive
atmospheres,
such as in the
presence
of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
(3) Keep bystanders,
children,
and visitors away while operating
a power
toot. Distractions can cause you to lose control.
2.
Electrical
Safety
(1) Double
Insulated
tolls are equipped
with a polarized
plug (one blade is
wider than the other .) This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact
a qualified
electrician
to install a polarized
outlet.
Do not change
the plug in any way. Double Insulation
[] eliminates the
need for the three wire grounded power cord and grounded power supply
system.
(2) Avoid
body
contact
with
grounded
surfaces
such
pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your
body is grounded.
(3) Don't expose
power tools
to rain or wet conditions.
Water entering a
power tool will increase the risk of electric shock.
(4) Do not abuse the cord. Never use the cord to carry the tools or pull the
plug form a receptacle.
Keep cord away from heat, oil, sharp edges or
moving
parts.
Replace
damaged
cords
immediately.
Damaged
cords
increase the risk of electric shock.
(5) When operating
a power tool outside,
use an outdoor
extension
cord
marked "W-A"
or "W". These cords are rated for outdoor use and reduce
the risk of electric shock.
3.
Personal
Safety
(1) Stay alert, watch
what you are doing
and use common
sense when
operating
a power tool. Do not use tool while tired or under the influ-
ence of drugs, alcohol,
or medication.
A moment of inattention while oper-
ating power tools may result in serious personal injury.
(2) Dress properly.
Do not wear loose clothing
or jewelry. Contain
long
hair.
Keep your
hair, clothing,
and gloves
away from
moving
parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
(3) Avoid accidental
starting.
Be sure switch is off before plugging
in.
Carrying tools with your finger on the switch or plugging in tools that have
the switch on invites accidents.
loading