Duofiller MONO G3 Manual De Instrucciones página 8

DUOFILLER GENERAL OPERATION
- Short button press: Start/stop ll sequence.
- Hold button until it blinks/stops blinking: Enter/exit programming mode.
- Continue holding the button while blinking: change between can/bottle mode.
- Hold button after lling: top up.
- Hold button on power up until blue light: Network reset.
- Hold button on power up until red light: Factory reset.
COLOR INDICATIONS:
At idle:
• blue color: can mode
• green color: bottle mode
• blinking: programming mode
During ll sequence:
• blue color: Purge valve open
• red color: Beverage valve open
duofiller.com
EN
6