Idiomas disponibles
Idiomas disponibles
[B] Use a hex screw driver to tighten the screw bolt with one hand, while using wrench to hold the nut
in place with the other hand. See image below.
[A]
NOTE!
When not in use, the guillotine's blade should be placed down (in horizontal position).
Using more than the recommended amount of paper could cause permanent damage to the
blade.
This product is intended for the cutting of paper. Do not use the product for any other purpose.
This product is not intended for use by children. Keep product out of the reach of children.
To avoid damage to the product:
Remove paper clips and staples from items before cutting paper.
Do not expose product to humidity, water or other liquids.
During use, the protective black coating of the blade may wear off over time.
To avoid possible severe personal injury:
Always operate the product on a flat, level, steady surface to avoid it overturning.
Never operate the guillotine without the transparent blade-guard in place.
Never carry the guillotine by the blade or the cutting handle.
Do not try to release jammed paper with a pointed object, as personal injury or product
damage may occur
Declaration of Conformity
The CE Mark on the device confirms conformity. The Declaration of
Conformity can be read online at www.go-europe.com.
Disposal
Find out about the possibilities of taking back used appliances free of charge
from your dealer.
The packaging is made of environmentally friendly materials that you can
dispose of at local recycling points. Advice on the options with which to dispose
of your old device can be obtained from your municipal or local administration
offices.
Observe the identification on the packaging materials during the waste sorting
process; they are identified by abbreviations (b) and numbers (a) which have
the following significance: 1–7: plastic/20–22: paper and cardboard/80–98:
composite materials.
[B]
-6-
