Idiomas disponibles
Idiomas disponibles
EN
INSTRUCTION
The operating manual represents a component part of the device. It contains important information
regarding safety, use and disposal. Familiarize yourself with all the operating and safety information
before starting to use the device. Only use the device as described and for the purpose for which it is
intended. Hand over all the documents with the device if it is transferred to third parties.
Model
Max. format
Cutting length
Max Cutting capacity (80g/m2)
Cutting table
Dimensions
Weight
Place the guillotine on a stable flat surface. Lift the blade up to its maximum position.
Place the paper on the guillotine underneath the transparent blade-guard and hold the transparent
blade-guard down to fix the paper. Lower the blade with the right hand.
Side Notes: Please place the paper into the correct position as images below to start cutting paper
Cleaning:
Warning! The blades of the device are very sharp! Danger of injury!
Clean the surface of the housing with a soft, dry, lint-free cloth. Do not use any solvents or cleaning
agents.
Maintenance:
To prolong the life-time of the blade, it is recommended to regularly wipe it down with a
silicone fluid, liquid Vaseline or other rust-preventative oil.
Should the blade loosen, follow the 2 below steps to tighten the blade:
[A] Use a screw driver to dismantle the grey part as shown in the image below.
GM A3
A3
460 mm
10
380x460 mm
510x450x60 mm
2,73 Kg
-5-
GM A4
A4
320 mm
12
250x320 mm
350x300x60 mm
1,64 Kg
