Idiomas disponibles
Idiomas disponibles
WATER PIPE SETUP INSTRUCTION
● The water pipe components and accessories are shown as below(The numbers of
sprinklers are subject to different models, our installation example has 2 sprinklers) :
Installation of the water pipe connector:
● After fixing the water pipe by Velcros, then find the pipe connector(joint).
● Connect the pipe connector(hose connector) to the end of a standard home
water pipe, as shown in the following detailed instruction.
● Tie the pipe clamp（hose clamp） to your own water pipe, like pics H shows.
● Connect the water pipe connector to your own water pipe with pipe clamp, like
the illustration of pics I. In order to avoid water spillage or leakage due to high
water pressure, make sure your water pipe completely covers the very front part
of the pipe connector properly.
● After binding the water pipe with the connector, then please screw and lock the
hose clam(pipe clamp)to the pipe, like pics J shows.
● For the proper installation, you need to pinch the ring part of the clamp with one
hand and clockwise tighten the hose clamp(pipe clamp) handle with other hand
until they are fixed tightly and unable to rotate.
08
①
Sprinkler head ①
①
Water pipe joint
The numbers of sprinklers are subject to different
product categories. So each sprinkler has its own
unique serial numbers to match up. For instance,
sprinkler 1 match No. 1, sprinkler 2 match No. 2,
etc. After confirming the right position of each
sprinkler, please bind the water pipe along with
the fixed Velcros in the structure.
②
Sprinkler head ②
Pipe clamp
1 1
EN
