bitmore E-PULSE PRO Guia Del Usuario página 4

CONNECTING TO BLUETOOTH
Note: Before first pairing, please ensure that the e-Pulse Pro are fully charged.
1. Turn on the headphones, an alternate flashing blue and red LED indicates the headphones
are in pairing mode
2. Turn on your device Bluetooth and ensure the headphones are no more than 1m apart
3. Select Bitmore ePulse from your device' Bluetooth list. A flashing blue LED indicates
your headphones are paired
Note: If you have paired your e-Pulse Pro to more than one Bluetooth device and have both in range
and switched on, you may experience connection issues. Ensure you turn off the Bluetooth from the
undesired device to stop this from happening.
USING THE 3.5MM AUX
If you want to go old school and have a wired audio experience, you can!
1. Turn off the headphones
2. Connect the supplied 3.5mm AUX cable to your headphones and the other
end to your audio source
CARING FOR YOUR E PULSE PRO
1. Avoid liquids and humidity
2. Do not use abrasive materials or chemicals to clean the headphones (use a slightly damp cloth and
dry immediately (avoid the charging or AUX ports and the buttons, as well as the internal circuitry)
3. Avoid extremely high or low temperatures (this will ruin the battery life)
4. Do not expose to flames, impacts, heights, or sharp objects
BM ECBTOE E PULSE PRO 3