Idiomas disponibles
Idiomas disponibles
IMPORTANT NOTE:
The top edge of the fixed blade must be a minimum of 1/32" (0.8 mm) higher than the
top edge of the moving blade and as centered as possible. This is important so that the
moving blade does not come in contact with the skin.
Be sure to add a few drops of BaBylissPRO
Don't forget to tighten the screws after the blades have been aligned.
C
Fixed Blade
Small Moving Blade
SPECIAL OIL
To maintain the blades on your BaBylissPRO
with oil.
Gently place 2 or 3 drops of oil on the teeth of the blades before and after each use.
Turn the clipper on for a minute, then turn off. This will help maintain sharpness and
prevent damage from overheating. Oil is included in your clipper set. This light, natural
oil was formulated specially for the BaBylissPRO
right oil to use, it will not slow down the blades. Never use any other product. There
is no substitute for BaBylissPRO
oil. KEEP OIL OUT OF THE REACH OF CHILDREN.
®
FX870N IB-18021A.indd 9-10
FX870N IB-18021A.indd 9-10
lubricating oil to the blades before running.
®
1/32" – 1/16"
®
clipper, be sure to lubricate them regularly
high-speed clipper. Because it is the
®
ADJUSTABLE TAPER LEVER
The taper lever is positioned at your thumb. You can hold
the clipper in your hand and adjust the lever at the same
time – while you are clipping.
The taper lever adjusts the closeness of the cut from
a close cut with the taper lever in the up position, to a
longer length cut with the taper lever in the down position. To increase cutting length,
slowly push the lever down. To cut closer, push the lever up. As different cutting edges
are used in each setting, using the taper lever lengthens the life of the clipper blades.
Too much hair can slow down hair clippers. Keep the clipper on for removing hair. Then
push the taper lever back and forth quickly several times. If you do this every time,
especially after a lot of hair cutting, the clipper blades should remain free of cut hair. Oil
the blades after the above procedures.
BATTERY SAFETY INFORMATION
1. This device requires one 18650 lithium-ion battery.
2. Since the battery is sensitive to high temperatures, when storing the battery, keep
it in a cool, dry place.
3. Never put battery into a fire.
4. Switch off device after use.
5. Keep batteries away from children, especially the batteries that are small enough
to ingest.
6. If a battery is ingested, seek immediate medical help.
7. Never open, crush, puncture or disassemble a battery.
8. Dispose of battery according to any state and local regulations.
9. Do not dispose of rechargeable battery as solid waste.
10. The battery must be removed from the appliance before it is recycled.
11. The battery is to be disposed of safely.
12. The appliance must be disconnected from any power supply when removing the
battery.
Close Cut
Longer Cut
2023/11/1 15:18
2023/11/1 15:18
