Powering The Scale - Health O Meter Professional 349KLX Manual Del Usuario

Back to Home Page

POWERING THE SCALE

Powering the Scale
If powering the scale via the optional AC adapter, plug the adapter into the display assembly
and into a power source.
Power Adapter
Port
For battery operation, see Battery Installation below.
Battery Installation
1. Unplug the AC adapter from the power source.
2. Use a Phillips head screwdriver to remove the battery cover on the back of the display
assembly.
Battery Cover
3. Replace or install fresh batteries. Note the orientation that is shown and ensure the
batteries are placed in the proper directon.
Note + orientation
Note: ®
Health o meter Professional recommends using alkaline or lithium batteries, rated for
130°F (54°C) operation. Do not use zinc-carbon batteries.
4. Re-attach the battery cover to the display assembly.
Warning: If the scale will not be used for some time, remove the batteries to avoid a
safety hazard. Disposal of batteries must be performed in accordance with the prevailing
national, regional or local regulations that apply to you.
UM349KLX REV20230913
10