Beta 1972/20V-13BMC Manual De Instrucciones página 9

INSTRUCTIONS FOR USE
TECHNICAL DATA
IDLE RPMs in 1st gear
IDLE RPMs in 2nd gear
MAXIMUM TORQUE
BATTERY VOLTAGE
CHUCK CAPACITY
IMPACTS PER MINUTE in 1st gear
IMPACTS PER MINUTE in 2nd gear
WEIGHT (EXCLUDING BATTERY)
OVERALL LENGTH
NOISE (ISO 15744)
SOUND POWER LEVEL
SOUND PRESSURE LEVEL
VIBRATIONS (ISO 28927)
VIBRATION LEVEL
UNCERTAINTY
KEY TO SYMBOLS
1. On/Off button
2. Revers Seitch
3. LED light
4. Autochuck
5. Clutch
6. Ring mode selector
7. Speed selector
8. Battery
9. Charge LED
10. Battery release button
USE
Power on and off
When the tool is in operation, LED light (3) turns on.
Press On/Off button (1). The button is fitted with a variable speed
controller. Gradually pressing button (1) harder, the drill will start
slowly, speed being increased from minimum to maximum. The
tool reaches its maximum speed when button (1) is pressed until
it stops. To stop the tool, release button (1) completely.
Setting direction of rotation
Pushing reverse switch (2) allows the direction of rotation of the
drill to be set. This operation can only be performed if the drill
is not running. Setting reverse switch (2) to the central position
will cause button (1) to be locked, which will prevent accidental
starting of the drill.
0 - 450 min
-1
0 - 1650 min
-1
80 Nm
20 V
13 mm
0 – 6750 (BPM)
0 – 24000 (BPM)
1,4 Kg
210 mm
L = 83,8 dB
WA
L = 75,8 dB
PA
3,275 m/s
2
K= 15 m/s
2
EN
9