Ego Power+ TR4200E Manual Del Usuario página 31

Tractor cortacésped eléctrico
LCD
Description
Display
Seat sensor icon
illuminates
PTO Switch icon blinks
The icon of a certain
battery compartment
blinks.
The icon of the empty
battery compartment
blinks
The temperature icon
and the exact occupied
battery compartment
blink at the same time.
The temperature icon
blinks.
Tractor
Audio
Status
Cause
Indicator
Indicator
The operator leaves the seat or
OFF
No
the seat safety interlock system
is disconnected.
The blade motor was
interrupted in operation and
OFF
No
the PTO switch is not set to off
position.
A certain battery during
OFF
No
discharging is over-current.
Battery capacity is not
OFF
No
sufficient to allow the tractor
to work.
The battery pack in the
corresponding numbered
OFF
No
battery compartment is
overheated.
The tractor is overheated.
OFF
One beep
The tractor is too cold.
Solution
If with the operator is seated on the seat
and the icon is on, stop operating the tractor
immediately and check the seat connection.
If the seat connection with the tractor is
confirmed correct, please contact a qualified
service technician for repairs.
Before restarting the tractor, push the PTO
switch down to turn off the blade motors.
Please see "TROUBLESHOOTING" section in
this manual for reference.
No action is needed. The tractor can continue
working if the combined battery Ah rating,
over-current battery excluded, is equal to
or more than 15Ah. Once the over-current
battery returns to normal, it will join in
powering the tractor immediately and the
icon will disappear.
In order to start this tractor, use enough EGO
batteries following the instructions in section
"ATTACHING/DETACHING THE BATTERY
PACK" in this manual.
1. The tractor can continue working if the
combined battery Ah rating, overheated
battery excluded, meets the requirement.
Once the overheated battery returns
to normal temperature, it will join in
powering the tractor immediately.
2. If the combined battery Ah rating does
not meet the requirement, the tractor
will not work until more battery packs
are inserted into the vacant battery
compartments.
3. Reduce the load of the tractor by raising
the deck cutting height or slowing
down the driving speed when resuming
operation.
Reduce the load of the tractor by raising the
deck cutting height or slowing down the
blade/driving speed. Take a break and allow
the tractor to cool.
Please do not make repeated attempts which
may damage the machine. Always store the
tractor and batteries in warm environment.
Restart the tractor when it is warmed up.
ELECTRIC LAWN TRACTOR — TR4200E
EN
31
loading