SPECIFICATIONS
Capacity:
Height:
Ram:
Air Inlet:
Wheel Diameter:
Air Hose:
Air Pressure:
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using tools basic safety precautions should always be followed to reduce, the risk of
personal injury and damage to equipment.
Read all instructions before using this tool.
1. Pay attention to the weight of the object to be lifted and do not overload the lifter.
2. Use the jack for lifting purposes only. The lifter is not suitable for other purposes. After lifting
the load, immediately support it with suitable stands.
3. The jack may only be used on a stable, level, clean and dry surface that can support the load.
4. Make sure the load is stable at all times. Do not move the jack after lifting a load.
5. When lifting a vehicle, apply the handbrake and block all wheels.
6. Keep the work area clean and well lit. Cluttered areas can lead to injuries.
7. Pay attention to the condition of the work area. Do not expose the jack to rain.
8. Children are never allowed to enter the work area. Never allow children to operate the lift.
9. Always keep the lifter locked up and out of the reach of children.
10. Do not use additional devices to increase capacity.
11. Only use the jack for loads for which the jack is designed.
12. Make sure you wear correct work clothing. Avoid wearing loose clothing or jewelry as they can
become caught in moving parts. It is recommended to wear protective clothing and non-slip
footwear while working. If you have long hair, you must wear a hair covering.
13. Always ensure you have a firm footing and keep your balance. Never reach over or through
running machines.
14. Keep the jack clean and in a technically perfect condition. Always follow instructions for
lubricating and replacing accessories. Always keep the handle clean, dry and free of oil and
grease!
15. Make sure all tools have been removed from the jack.
16. Always operate the jack with common sense and not when you are tired.
17. Make sure that the jack and jack components are not damaged. Damage to the jack can
negatively affect its performance and safety. All damaged parts must be replaced before use.
18. Only use identical replacement parts, otherwise the warranty will be void.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Hydraulic Service Jack
max. 22 ton
min. 225 mm (8-7/8")
max. 435 mm (17-1/8")
1/4" NPT
72 mm
10 mm (3/8") (ID)
1.2 m (48 inch) length
crimped hose fittings
6.9 – 8.3 bar (120 – 200 PSI)
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 2888
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
