Craftsman 358.360100 Manual De Instrucciones página 6

Idiomas disponibles

Idiomas disponibles

joints,discontinue the useofthistool
and seek medical attention An anti-vi-
bration system does not guarantee the
avoidance of these problems. Users
who operate power tools on a continual
and regular basis must closely monitor
their physical condition and the condition
of this tool.
CHAIN BRAKE:
If this saw is to be
used for commercial logging, a chain
brake is required and shall not be re-
moved or otherwise disabled to comply
with Federal OSHA Regulations for
Commercial Legging
SPARK ARRESTING
SCREEN:
Your
saw is equipped with a temperature lim-
iting muffler and spark arresting screen
which meets the requirements of Califor-
nia Codes 4442 and 4443. All U.S. for-
est land and the states of Califomia, Ida-
ho, Maine, Minnesota, New Jersey,
Oregon, and Washington
require by law
that many intemal combustion engines
be equipped with a spark arresting
screen. If you operate a chain saw in a
state or locale where such regulations
exist, you are legally responsible for
maintaining the operating condition of
these parts Failure to do so is a viola-
tion of the law Refer to Customer Re-
sponsibilities chart in the MAINTENANCE
section.
STANDARDS:
This chain saw is listed
by Underwriters Laboratories, Inc in ac-
cordance with American National Stan-
dards for Gasoline-Powered
Chain
Saws Safety Requirements (ANSI
B175 1-2000).
_k WARNING:
Before usingchain
saw, ensure all fasteners are secure
CARTON CONTENTS
Check carton contentsagainst the fol-
lowinglist.
Model 358.360100
• Chain Saw (fully assembled)
• 2-cycle engine oil
• Carrying case
• Extra chain
Examine parts for damage Do not use
damaged pads.
If you need assistance
or find that parts
are missing or damaged, please call
1-800-235-5878.
NOTE: It is normal to hear the fuel filter
rattle in an empty fuel tank.
Your unit has been factory tested and
the carburetor precisely adjusted. As a
result you may smell gasoline or find a
drop of oil/fuel residue on the muffler
when you unpack the unit.
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.
loading