Idiomas disponibles
Idiomas disponibles
EN
User Manual
Card reader USB 2.0
1
Safety instructions
The user manual is part of the product and contains important information for
correct use.
•
Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the product.
•
Keep this user manual.
•
Do not open the housing.
•
Do not modify product and accessories.
•
Do not short-circuit connectors and circuits.
A defective device may not be put into operation, but must be protected
against further use.
•
Use product, product parts and accessories only in perfect condition.
•
Avoid stresses such as heat and cold, moisture and direct sunlight, mic-
rowaves, vibrations and mechanical pressure.
•
In case of questions, defects, mechanical damage, trouble and other
problems, non-recoverable by the documentation, contact your dealer or
producer.
Not meant for children. The product is not a toy!
•
Secure packaging, small parts and insulation against accidental use.
2
Description and function
2.1 Product
The USB 2.0 card reader is used to read MicroSD and SD memory card for-
mats.
○ Fast data transfer thanks to Hi-Speed USB 2.0 connection
○ Suitable for SD, SDHC, SDXC and MicroSD (with adapter) memory
cards
○ Data transfer rate of over 480 Mbit/s
○ LED indicates the operating status of the card reader
○ Supports plug & play and hot-swapping
2.2 Scope of delivery
Card reader USB 2.0, User Manual
2.3 Operating Elements
1 Operating LED
2 SD card slot
2.4 Specifications
Article number
Connections
Data transfer rate
Compatible with
SD, SDHC, SDXC and MicroSD memory cards
System require-
ments
Dimensions (mm)
Weight (g)
3
Intended use
We do not permit using the device in other ways like described in
chapter "Description and Function" or in the "Safety Instructions".
Use the product only in dry interior rooms. Not attending to these
regulations and safety instructions might cause fatal accidents, injuries, and
damages to persons and property.
4
Preparation
1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensure compatibility.
5
Connection and operation
1. Plug the card reader into a USB port on your PC / notebook.
Wait approx. 5 seconds until the device has been recognized.
The operation LED lights up when the card reader is ready for operation.
2. Insert a suitable memory card into the card reader.
Make sure that it is correctly seated. Depending on the design, it may be
necessary to use a memory card adapter, e.g. for MicroSD cards.
3. Do not remove the card reader until there is no memory card in it.
Otherwise, data may be lost.
REV2021-07-02
V2.0 cl
Subject to change without notice.
3 USB 2.0 connector, Type A
4 Protective cap
95682
SB 2.0 connector, Type A
SD card slot
Max. 480 Mbit/s
Windows 2000, XP, VISTA 7, 8, 10
61 x 22 x 11
9.72
6
Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE!
Material damage
•
Only use a dry and soft cloth for cleaning.
•
Do not use detergents or chemicals.
•
Store the product out the reach of children and in a dry and dust-protec-
ted ambience when not in use.
•
Store cool and dry.
•
Keep and use the original packaging for transport.
7
Disposal instructions
7.1 Product
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its compo-
nents must be recycled or disposed apart from each other. Otherwise
contaminative and hazardous substances can damage the health and
pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic
devices to the producer, the dealer, or public collecting points at the end of the
devices lifetime for free. Particulars are regulated in national right. The symbol
on the product, in the user manual, or at the packaging alludes to these terms.
With this kind of waste separation, application, and waste disposal of used
devices you achieve an important share to environmental protection.
WEEE No: 82898622
7.2 Packaging
Packaging can be disposed of free of charge at the suitable collection
points – paper belongs in paper bins, plastics belong in yellow sacks
and glass belongs in used glass bins.
DE4535302615620
8
EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic
GmbH ensures, that the product is conformed to the basic European
standards and directives.
9
Symbols used
For indoor use only
Recycling
- 2 -
IEC 60417- 5957
ISO 7001 - PI PF
066
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
95682
Goobay®
