Idiomas disponibles
Idiomas disponibles
Product size
100mm x 22mm x 9.5mm (LxBxH)
Size of inner packaging
14.6 x 10 x 1.5cm
Outer packaging size
53 x 29 x 37cm
Battery type
Lithium polymer battery
Battery model
351455
Battery voltage
3.7V
Battery capacity
230mAh
Battery life for playback of
Around 25h (playback via headphones), or
recording files
3h - 7h (via loudspeaker), depending on
volume.
About 25 h (actual value may vary slightly
Battery life for voice
depending
recording
reduction level, etc.).
Recording and storage
About 360 h (at 64 kbps), about 45 h
duration in case of 8 GB
(at 512 kbps) or 15 h (at 1536 kbps).
memory
Charging mode
Direct insertion
Charger specifications
500ma output
Charging voltage
USB5V
Charging time
About 2h - 3h
on
recording
quality,
noise
45
Frequently asked questions
(I)
How can I adjust the recording sensitivity to get the best
results?
When the main field recording is noisy, you should reduce the
recording sensitivity (e.g. from sensitivity 1 to 3) to eliminate the
ambient noise. When the main recording is low or fluctuating,
you should increase the recording sensitivity (e.g. sensitivity
level 5 or 6) and move the recorder closer to the sound source.
(II)
Why is there noise in a recording?
Under normal circumstances, it is absolutely impossible for
audio equipment to be noise-free in a recording, so the amount
of noise is relative. Also, if the recording sensitivity or bit rate is
too high, you will record ambient noise. You should choose an
appropriate recording sensitivity and bit rate to reduce noise.
(III)
Why can't I transfer files when I connect to my computer's
USB?
We recommend that you try another USB port. Check that the
USB cable is in good condition, that the USB interface between
the recorder and the computer is not damaged and that the
computer has a USB driver installed.
(IV)
Why is the sound of the recording low?
Check that the playback volume of the recorder is set to
maximum. If it is, we suggest that you connect headphones and
try listening to it.
(V)
Why does nothing appear on the screen?
Check that the unit is switched on, then check that the
product's battery is fully charged; if not, charge it.
(VI)
Why can't I hear anything through the loudspeakers?
If there is no sound when the headphones are plugged in.
If there is sound when the headphones are plugged in, it may
be due to poor contact with the headphone jack or a damaged
speaker. Please contact the sales department / point of sale
for repair.
46
