Program Playback - OK. ORC 610 DAB+ Manual De Instrucciones

CD/USB PLAYBACK
1. Start or pause playback: Press
20
the display.
2. Stop playback: Press STOP. In stop mode, total number and time of tracks will appear on the
display.
3. Skip to next track: Press
4. Skip to previous track: Press
5. During playback, press AMS/MODE repeatedly to switch the playback modes as follows:
Press
1x
2x
3x
4x
5x
6x
Notes:
• This product reads CD, CD-R/-RW and MP3-CD discs. Other discs are not supported.
• When playing CD-R/RW discs the playback quality might be influenced by the quality of the burned
disc. When burning CD-R/RW disks with audio files we recommend using the slowest burning speed.

PROGRAM PLAYBACK

Notes:
• Up to 20 CD tracks or up to 99 MP3 tracks can be programmed for a playback in any desired order.
• Programmed playback can only be made from one single source - it cannot include tracks from CD
disc and USB storage at the same time.
Stop playback: Press STOP.
1.
21
Enter program settings: Press AMS/MODE. MEM and P01 will show on the display.
2.
3. Select desired track: Press
Store selected track into the program memory: Press AMS/MODE again. P02 will now show
4.
on the display.
5. Repeat step 3 and 4 to program additional tracks.
6. After programming all the desired tracks, press
on the display.
7. Stop playback: Press 1x STOP.
Cancel program playback: Press 2x STOP. MEM disappears from the display.
8.
IM_ORC 610_170623_A_V05_HR.indb 27
. In pause mode, remain time of the playing track will flash on
. Press and hold to fast forward.
. Press and hold to fast reverse.
Display Result
Normal Normal playback
Repeat One Repeat one track
Repeat Folder Repeat Album (only available for MP3)
Repeat All Repeat all tracks
Random Play a track randomly
Normal Normal playback
or
27
.
to start program playback. MEM appears
EN
26/6/17 3:16 pm