Idiomas disponibles
Idiomas disponibles
Counting Function
1. Press the
2. Place a sample quantity of 25,50,75 or 100 pcs of the
item you want to count on the platform.
3. Press and hold the
4. Tap the
average piece weight (APW) in memory.
5. Your may now place any quantity on the scaleand view
the piece count.("PCS" will show on the display)
Calibration
1.Prepare the required weight for your scale. (see chart
on back)
2. Find a flat and level surface to perform calibration and let
the scale adjust to room temperature.
3. Press
to stabilize.
4. Make sure nothing is on the platform, Long press
button the display will show "CAL", the display will flash
the required weight.
5. Place the required calibration weight
on the center of the platform.
6. The display will show "PASS"
then return to normal weighing
mode. You may now turn the
scale off or continue weighing.
Accuracy
Your scale comes calibrated from the factory and most
users wont need to calibrate their scale for a long time.
You should check your scale's accuracy periodically using
calibration weights and perform calibration if necessary.
key to turn the scale on.
P
key to select your sample qty and set the
M
to turn the scale on and wait for the scale
key to enter counting setup.
5
M
