Machine Assembly - benza BZWT 700 Manual Del Usuario

Machine assembly

After removing the machine from its box open the tool kit and follow the assembly instructions
detailed below:
wheel machine assembly : , Place wheels towards the engine if the machine is fitted with rear-
mounted implements (rotary hoe, plough etc). and away from the engine if fitted with
front-mounted implements(cutter-bar.mower etc.) inflating pressure is 1.2/1.5 bar(see tab. 1 pag.33),
C arefully read the instructions related to the engine . I f the engine is fitted with an oil-bath air filter , f ill up
to the indicated level with correct quantity and quality.
Check that all screws and nuts are well tightened. In particular those fixing the implement to the machine
Ge e e ne e e ra a a l Safety
Atten n n tion n n ,d d d an n n ger
Learn how to switch off the motor quickly
Get acquainted with the commands and the correct use of the machine
Get ready for work by wearing resistant shoe and long trousers
Before starting work remove all foreign matter (stones, metal wires, rods etc.) from the area were the
equipment is to be used . R ead all labels on security rules applied on the machine , and follow the instructions
given before starting, operating, fill ing up with fuel or perform ing any maintenance operation on the machine.
Be safe and steady when working. Always work transversally, never on steep upward or downward slopes. Pay
attention when changing the working direction. Never work on slopes st eeper than 25%.
Stop the e ngine before checking or repairing the machine; if the machine starts vibrating in an abnormal
way perform a complete check on it
Stop the engine before leaving the machine or to perform any adjustment on implements and before filling it up
with fuel.
Always check that nuts and bolts are securely fixed
Always keep the machine free from grass or grease in order to avoid any risk of fire
Gasoline is highly flammable
Stock the fuel in tanks specific for that use
Always fill up the tank in an open space; do not smoke during this operation.
Add the fuel when the motor is off
Replace the exhaust pipe when worn out
Starting of the motor
Disengage all command levers before starting the motor
Keep your feet far from the implement of the machine
when operating
Always use the machine with day-light or with a strong light. Walk with the machine, never run
Page 9