Idiomas disponibles
Idiomas disponibles
Battery capacity: when the power station is being charged, the remaining battery percentage (1.) will flicker.
Wi-Fi connection status: The flickering icon indicates that the power station is ready for pairing. The icon will
keep flickering if a mobile phone and power station are connected by hotspot. After a successful network
connection, the icon will always be on. If the connection fails, the icon will be off.
Use
1. Press the main power switch to turn on the device; the screen and the power indicator will light up.
2. If no operation is performed on the power station for 5 minutes, the power station will enter a hibernation
state, and the LCD screen will automatically turn off. When there is a load change or operation on the
power station, the LCD screen will automatically light up. Press the main power switch to turn on or turn
off the LCD screen.
3. Press and hold the main power switch to turn off the power station.
4. In normal mode (when the power is above 5%), the default standby time of this product is 2 hours. When
the AC output switch is not turned on, and there is no charge or discharge for 2 hours, the product will
automatically shut down. The standby time can be set on the APP. When the power is 5% or below, the
product will be forced to enter low power mode. In the case of no charge or discharge, the product will
adjust the standby time according to the power and automatically shut down.
5. In normal mode, long-press the LED light button to exit the automatic shutdown setting, and the battery
icon on the screen will flash. Long-press again to enter the automatic shutdown setting, and the battery
icon will not flash. (The automatic shutdown setting is to protect the battery from low power; exiting this
setting may damage the battery life, so please use it with caution.)
1. Short-press LED light button
2. Short-press the LED light button to switch between four modes: low light, medium light, bright light, SOS
and light off.
