Eldom twinn OC600 Manual Del Usuario página 11

of
INSTRUKCJA OBSŁUGI
al
ODKURZACZ BEZPRZEWODOWY OB90
or
• GENERAL DESCRIPTION
ly
1.
d
2.
3.
d
4.
t.
5.
6.
n.
7.
e
8.
9.
10. Container Lock Button (12)
11. Outlet openings
er
12. Dust container
13. HEPA Filter
14. Socket for suction nozzles (15)
g
15. Suction nozzles
• INTENDED USE
as
OC600 vacuum cleaner is designed for vacuuming floors, but also curtains, curtains, upholstered furniture, etc. Thanks to
its universal design and extensive equipment, it can easily handle dust removal both at home and, for example, in the car.
• ASSEMBLY
n
− Unpack the device and check if any of the components have been damaged.
n-
− Press the button (10) and disconnect the container (12) from the handheld vacuum cleaner (8) — Fig. 2.
− Insert the HEPA filter (13) into the container (12) and then assemble the whole in a handheld vacuum
is
cleaner (8) - Fig. 3.
or
ATTENTION. Do not use the vertical and manual vacuum cleaner without the HEPA filter (13)
ty and the container (12).
− Insert one of the ends (15) into the socket (14) — Fig. 4.
− Insert the tube (3) into the socket (6) and lock it with a lock (4) – Fig. 5.
s,
• VERTICAL VACUUM CLEANER OPERATION
o
− Ensure that the container (12) is fitted with a HEPA filter (13).
− Insert the tube (3) into the socket (6) and lock it with a lock (4) – Fig. 5.
− In the socket (14) install one of the suction nozzles (15) - Fig. 4.
− Plug the power cord (5) into a socket with the parameters specified in the manual.
− The vacuum cleaner starts working when the switch (9) is switched to the 'I' position.
− When working with a vertical vacuum cleaner, hold the device by the handle (1).
d
− Observe the filling status of the container (12) – if the container (12) is full, empty it (see EMPTYING THE
DUST CONTAINER).
ll
− To switch off the vacuum cleaner, switch the switch (9) to "0".
− When finished, clean the vacuum cleaner (see CLEANING AND MAINTENANCE).
• HANDHELD VACUUM CLEANER USAGE
− Remove the latch (4) and remove the tube (3) from the socket (6) — Fig. 5.
− Ensure that the container (12) is fitted with a HEPA filter (13).
− In the socket (14) install one of the suction nozzles (15) – Fig. 4.
− Plug the power cord (5) into a socket with the parameters specified in the manual.
− The vacuum cleaner starts working when the switch (9) is switched to the 'I' position.
− When working with the handheld vacuum cleaner (8), hold the device by the handle (7).
− Observe the filling status of the container (12) – if the container (12) is full, empty it (see EMPTYING THE
DUST CONTAINER).
− To switch off the vacuum cleaner, switch the switch (9) to "0".
− When finished, clean the vacuum cleaner (see CLEANING AND MAINTENANCE).
Vertical vacuum cleaner holder
Cable hanger – top
Tube
Cable Hanger - Bottom / Tube Lock (3)
Wire
Tube Socket (3)
Handheld Vacuum Cleaner Handle
Handheld Vacuum Cleaner
Switch
INSTRUCTION MANUAL
2-in-1 VACUUM CLEANER OC600
• TECHNICAL DATA
− Rated power: 500W
− Supply voltage:
− Volume: <80dB
− Dust-container capacity: 1,2 l
220-240V~ 50/60Hz
EN
11