Idiomas disponibles
Idiomas disponibles
SEE FIG. D.3.
4. The blue charging LED will light up. SEE FIG. D.4.
5. Press the power button for 3 seconds. The display and the red power LED
will light up. SEE FIG. D.5.
CAUTION: Use only the original charger for the original set. Failure to follow the
instructions may result in damage or other dangerous situations.
08. USE OF THE DEVICE
Preparation of the device
Place the camera (transmitter) in a convenient location (e.g. on a table) and point
its lens towards the area you wish to monitor. Adjust the camera until you are
satisfied with the image displayed by the monitor.
CAUTION: Do not place the camera within the reach of a child! If there is interferen-
ce with the picture or sound, move the units to other locations and make sure they
are not near other electrical equipment.
Camera pairing
The attached camera (transmitter) has already been paired at the factory, you
do not need to re-register it with the monitor (receiver) unless the devices lose
connection. If you need to re-pair the camera or pair an additional camera, please
follow the steps below:
1. Switch on the camera (transmitter) and hold down the pairing button.
2. On the monitor (receiver), press „OK" and then under Camera, select Add
camera and confirm with „OK".
3. The monitor (receiver) will display the message „Registration successful".
Up to four cameras can be paired with the monitor (kit includes one camera). If
you want to take full advantage of the multi-camera pairing feature we suggest
purchasing an additional Neno Vista camera.
VOX
Press the ‚OK' button on the monitor to enter the menu and then select the VOX
item. By activating the VOX mode, you can also set the sensitivity level for sound
detection. In this mode, the screen automatically switches off to save power. The
screen reactivates automatically when noise is detected at the camera site.
Voice transfer function (PTT)
Hold down the voice transfer button (PTT) on the monitor (receiver) to speak to the
child via the camera speaker. The corresponding symbol will appear in the centre
of the screen.
15
