Idiomas disponibles
Idiomas disponibles
05. ICONS ON THE MONITOR DISPLAY
SEE FIG. C
1. Signal strength indicator
2. Viewing indicator for selected camera
3. Temperature at camera site
4. Approximation level
5. VOX mode active
6. Active alarm
7. Time
8. Battery level
9. Voice transfer function (PTT) activated
10. Camera control indicator
11. Brightness level
12. Volume level
06. MONTAGE
Method 1: Place the camera on a flat, dry surface.
Method 2: The product comes with a kit with which you will mount the camera on
the wall. Using screws and dowels, screw the cap onto the wall and then screw the
camera onto the thread. Check that the camera is correctly fixed and will not fall
out of the thread.
Method 3: A flexible bracket is included with the product, with which you mount
the camera in the location of your choice. Wind the bracket and then screw the
camera onto the thread. Check that the camera is correctly attached and will not
fall out of the thread.
CAUTION: Leave the charging cable in a safe place (position) out of the reach of the
child. Failure to do so may put the child at risk of suffocation or other dangerous
situations (e.g. electric shock).
07. GETTING STARTED
1. Connect the power supply to the camera (transmitter) and electrical outlet.
SEE FIG. D.1.
2. Slide the power button to the right to switch on the camera (transmitter).
The blue power LED will light up. SEE FIG. D.2.
3. Connect the power supply to the monitor (receiver) and the electrical outlet.
14
