GE Profile 23 Manual Del Propietario E Instalación página 8

About the shelves,bins and racks.
Not all features are on all models.
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Refrigerator bin
Freezer tilt-out bin
Large Bins
The larger reli_igerator door 1)ins and
fl'eezer
filt-_mt door bins are a(!justable,
To remove: iJfi the fl'ont of the bin straight
up, then lilt up and out.
Toreplace or relocate: Engage the back side
of the bin in the molded SUl)ports of the
door Then push down on the fl'ont of the
bin. Bin will lock in place.
Small Bins
To remove: Lift the fl'ont of the bin straight
up then out.
Toreplace:
Position the bin above the
rectangular molded SUl)ports on the (lore;
Then slide the bin down onto the support
to lock it in place.
Thesnuggerhelps
prevent
tipping,
spilling
or sliding of small items stored on the door
shelf, Place a finger on either side _ff the
snugger near the rear and move it back
and tbrth to fit your needs,
Do not block
CAUTION: B e
carefulwhenp/aclbg
itemsin thetopb/h.
Make sure that
items do not block
or fail into the Ice
chute.
Door Wine/Beverage Rack (onsomemodels)
This rack holds up to 5 cans, one bottle of
wine or one 2-liter bottle of soda,
The rock hangs fl'om the sides of the
dairy 1)in,
To replace:
Reattach the rack to the sides
of the bin.
To remove:
O Empty the wine/bexerage rack.
O Holding the bottom of the dair) bin,
lilt the front smfight up, then lilt up
and Otlt,
Engage the back side of the bin in
the molded supp(>rts (m the (loot:
Then push down on the fl'ont ()I the
bin. The bin will lock into place.
To detach the rack fl'om the dairy bin
pull the rack's side wires out of the
holes on each side of the dairy bin.